Turning a long horizontal enclosure vertically?

zuper8

New member
I have seen many posts on this forum recommending turning horizontal enclosures upright as an inexpensive way to give some height to the enclosure of an arboreal species.

However, no one has explained how to do it well, and working through it in my head I can see a few problems coming up. Was wondering if folks could chime in who have done this, or even post some examples of successful conversions for beginners like myself who would be looking into it. I am thinking of Tokay geckos specifically but I hope this thread will be helpful for other species too.

Obviously you turn it upright and get screen clamps. I figured you could get some peel and stick "feet" for underneath to make the top easier to remove.

So questions/ potential issues:

1. Heat lamp: I imagine you would place it directly on the glass at the top, in order to heat the tank sufficiently. However, would the glass get too hot and potentially burn the gecko?

2. If you hung the lamp on a stand, could it ever keep the tank warm enough in places that get cold winters?

3. Wouldn't all the heat escape out the screen top which would now be in front?

4. If you wanted any substrate, what is a cheap way to box it in so that it doesn't all fall out every time you take off the screen?

Again, any examples would be great... thanks! Nice vertical enclosures aren't easy to find cheap, I paid $250 for mine. If I got another Tokay I would be looking into turning a horizontal tank upright instead, if it's feasible with the substrate and heating.
 

cricket4u

New member
Type turning a cage upright in google and you'll see an example posted on another forum. At least it will provide you with ideas and you can adjust the rest. I just can't post a link to another forum.
 
Last edited:

CrestedRick

Active member
There are kits you can purchase to make a solid door instead of the screen top as the door. Also how tall are we talking because Tokays need a substantial amount of height say 24inches minimum. But google it or search the forums here, I've come across a few over the time I've been a member here. Good luck!
 

Cuppencake

New member
I was always thinking of just getting a glass etcher and etching out the top (well one of the side when you turn it upright) and then etching that piece and caulking it to the frame so substrate doesn't fall out. (of course removing access) but then you can place a screen top where you etched the glass piece out. glass etcher / knives are only a few dollars. as far as a door goes i have no idea, i normally end up getting glass from windows or something that is thick enough. (not tempered) because if you try to cut tempered glass its going to shatter. with some hinges and from there i guess. but i suck at building stuff as its so time consuming. but if you can get it to work successfully thats great.
 

Tamara

New member
So, this used to be an aquarium that we converted...

image.jpg

We first cut out one side panel and replaced it with a screen cover for proper ventilation, then we glued two pieces of waterproof wood ( u could use pvc or glas too ) at the top and the bottom wich holds the substrate in and hold the rails for the sliding doors in place.
Next step is cutting the two windows at the right size, install them and you are done.

Here is another photo, it's the enclosure on the left side.

image.jpg
 
Last edited:

jmrisnear

New member
Does anybody know of any companies that sell conversion kits besides jungle box. I'm looking into getting one for my 20 tall and 10 gallon aquariums.
 

Ophiomancer

New member
What a useful thread! I'm going in another direction and trying to find plastic bins that work for Tokays (tricky, since they can stick to some plastics but not others), however I am definitely keeping this in mind in case I find some appropriately sized glass aquariums for cheap.
 

booth2010

New member
I have seen a lot of people doing this and the idea seems cool, my only concern is that aquariums are not built or braced to be stood up on their side. It just puts a little extra stess on the glass and seems. Most likely okay with smaller tanks but I would never go above a 30gal personally.
 

Riverside Reptiles

Administrator (HMFIC)
All depends on how well you design it. I've done many 55 gallon conversions with no problems.
 

Attachments

  • 55gallonvert1.jpg
    55gallonvert1.jpg
    93.6 KB · Views: 24

Riverside Reptiles

Administrator (HMFIC)
It cost almost nothing to do that and only took a couple of hours. Easy project.
Great way to upcycle old 55 gallon tanks which many people will give away for free or near free.
And when turned vert like that, they have a very small footprint in the room.
 

booth2010

New member
It cost almost nothing to do that and only took a couple of hours. Easy project.
Great way to upcycle old 55 gallon tanks which many people will give away for free or near free.
And when turned vert like that, they have a very small footprint in the room.

Did you take off original aquarium bracing before putting it in the wood structure?
 
Top