Type/source of tank divider ?
- Thread starter Toyvet
- Start date
miguel camacho!
New member
you can get plexiglass cut for you at home improvement stores. then all you need on top of that is some aquarium glue you can get at the pet shop, you might even be able to find some at the home improvement store too, but you wanna make sure its herp safe.
greg
I use an aquarium sealant I purchased through glasscages.com. Its designed for fish tanks. its pretty cheap but is completely water proof. If you have a glass shop nearby your place, go in with the tank and ask them to cut a piece of 1/4 inch glass to fit the dimensions you need. They should do it for a low cost. 1/4 inch glass in that size of a tank will be extremely strong. Most shops can cut it from scrap glass too.
Jason
I use an aquarium sealant I purchased through glasscages.com. Its designed for fish tanks. its pretty cheap but is completely water proof. If you have a glass shop nearby your place, go in with the tank and ask them to cut a piece of 1/4 inch glass to fit the dimensions you need. They should do it for a low cost. 1/4 inch glass in that size of a tank will be extremely strong. Most shops can cut it from scrap glass too.
Jason