2.5 gallon vert built for newly hatched L. williamsi

dom

New member
The 2.5 gallon vertical tank build for my newly hatched Lygodactylus williamsi. Following this method you can convert any fish tank into a vivarium!

First I began with a 2.5 gallon tank from petsmart and took out the one of the small side panels. I need a screen top for UVB , if you dont need a screen top you can omit this step and a few other.

IMAG0119.jpg


The Next step is to build the top replacement, I needed to have a screen top due to the need for UVB lighting. Its built from screen window framing, and the window screen material from Home Depot.

Top view
IMAG0118.jpg


Bottom View
IMAG0117.jpg


I add hot glue around the trimming to make sure its stays there.

IMAG0122.jpg


You will need to build a new front to hold in substrate and a door. I just buy the Glass sheets from Homedepot, its pretty thing and easily cut with a hand tool. There is trimming on the edges of the glass that the geckos would be able to climb over so they don’t accidently cut them-selves. Front side is spray painted black for good looks.


IMAG0115.jpg



Now we grab all out Tools and pieces together

Beer
Tank
Replacement top
Front Glass pieces
Front Hindge
Glue Gun (EVERYTHING I PUT TOGETHER WAS WITH A GLUE GUN) it’s a breeze and so much nicer and cleaner than silicon.
Beer

IMAG0114.jpg



After the glass is all cleared from the top we can glue in the top screen
IMAG0120.jpg

IMAG0123.jpg


I had some extra room on the sides so I filled it in with Hot glue

IMAG0125.jpg


Glue on the bottom glass piece
IMAG0126.jpg


Add the door and hindge

IMAG0127.jpg

IMAG0128.jpg


Put on sweet knob and latch to keep door shut, If you notice you have a gap between the door glass and the black trimming, you can add a dab of hot glue under were the latch will sit, this pushes the glass onto the black trimming nice and snug.

IMAG0129.jpg


Now that your tank is all put together lets add the substrate.

It’s a mix of fluorite and orchid bark.
IMAG0130.jpg


Add some moss to the ground and add a few plants. I used a sweet begonia.

IMAG0133.jpg


Then added a totally awesome piece of Cork Bark with a brom mounted on it.

IMAG0131.jpg

IMAG0134.jpg


then you guessed it .. add some leaf litter!!

IMAG0135.jpg


Your tank is complete.

Final Product Pictures

IMAG0141.jpg


and the newly hatched (3-10-2011) Lygodactylus williamsi

IMAG0111.jpg

IMAG0112.jpg


Hope you all enjoyed, I will be playing around with adding some creeping plants as well just to get some good green foliage in there as well. I plan on seeding this with spring tails to get a nice food source for the little guy as well.

so stoked this is my first hatchling!
 

hexentanz

New member
Very nice! You should add some bottom front ventilation though in your next tanks. It is very important that air flow can pass across the soil or bacteria will build up and eventually lead to death of the little ones.
 

dom

New member
Very nice! You should add some bottom front ventilation though in your next tanks. It is very important that air flow can pass across the soil or bacteria will build up and eventually lead to death of the little ones.

Thanx Maureen, I will definetly do that when I build its perminate enclosure!
 

hexentanz

New member
No problem!

Btw is the screen fabric or is it the pictures making it look like the fabric type?

If it is fabric you will want to switch to something else, crickets could chew the screen if they get up there leaving a big enough gap for babies to come through. Also those fabric screens in general have a tendency to stretch out over time, a baby could try and squeeze through. There is also a chance for it to melt under the lighting.
 

dom

New member
The screen is normal Fiberglass wire screening used for windows. I dont feed with crickets. I use FF's , so unless i get some mutant FF i dont think i have to worry about them chewing through the screen . God help us the day FF's can do that :)



No problem!

Btw is the screen fabric or is it the pictures making it look like the fabric type?

If it is fabric you will want to switch to something else, crickets could chew the screen if they get up there leaving a big enough gap for babies to come through. Also those fabric screens in general have a tendency to stretch out over time, a baby could try and squeeze through. There is also a chance for it to melt under the lighting.
 

purplesally

New member
I realize this thread is old.

The idea of using the 2.5 gallon as a vertical viv is genius. :yahoo:

I have a 10 gallon tank that has the vertical conversion kit.

How did you remove the glass for the screen area??
 
Top