Photo Shoot!

Douceboyz

New member
I just built a DIY light box for my reptiles and did a quick photoshoot to test it out. They aren't fired up in these pics since I just woke them up in the middle of the day.

The male chocolate/cream partial pinstripe "candy corn" harlequin is Tum Tum.
The female halloween flame is Colt (female name pending).
The male brindle flame is Rocky.

P.S. I had to turn down the quality for some of the pics in order to upload directly to the forum. Those are the slightly "fuzzy" looking ones.
 

Attachments

  • 022 (1280x822).jpg
    022 (1280x822).jpg
    64 KB · Views: 79
  • 023 (1280x706).jpg
    023 (1280x706).jpg
    80.7 KB · Views: 73
  • 067 (1280x1193).jpg
    067 (1280x1193).jpg
    108.4 KB · Views: 78
  • 068 (1280x820).jpg
    068 (1280x820).jpg
    66 KB · Views: 70
  • 069 (1280x788).jpg
    069 (1280x788).jpg
    60 KB · Views: 64
  • 054 (1280x853).jpg
    054 (1280x853).jpg
    107.6 KB · Views: 28
  • 058 (1280x853).jpg
    058 (1280x853).jpg
    76.3 KB · Views: 26
  • 064 (1280x839).jpg
    064 (1280x839).jpg
    76.8 KB · Views: 42

Douceboyz

New member
Ya Rocky and Colt were really good and gave me some good shots. But little TumTum wouldn't give me much haha.
 

Douceboyz

New member
How'd you build your light box?

1. cut 4-5in diameter holes on both sides of a cardboard box.
2. Put a thin sheet of t-shirt over the holes.
3. On the inside put two pieces of white paper (ground,background).
4. Shine lights through the t-shirt covered holes.
 

Rhac

New member
1. cut 4-5in diameter holes on both sides of a cardboard box.
2. Put a thin sheet of t-shirt over the holes.
3. On the inside put two pieces of white paper (ground,background).
4. Shine lights through the t-shirt covered holes.

Nice:D Cheers, might try that one...
 
Top